Thinking of expanding my listings with an Octavia pedal. Since it has the transformer, I figure it has less of a diy following much like the Broadcast. I plan to use the same enclosure layout as the broadcast and use an ON/OFF toggle to lift the octave diode.
Vero From tagboards
Vero from Sabrotone
Schematic below with diode lift at the end. http://fuzzcentral.ssguitar.com/octavia.php
Few pedals carry the same legendary status as the Tycobrahe Octavia. It's quite possibly one of the hardest to find pedals around, mainly because there weren't a lot of them built. When you do find one, the price can very easily surpass $800 for a good one. There are a lot of stories surrounding this pedal as to whether or not it's the same circuit that was used by Jimi Hendrix. The story is that the circuit was designed by Roger Mayer to be used by Hendrix and was copied by one of the Tycobrahe engineers when it was brought in for servicing in the US. Do I believe it? Not really. Roger Mayer also claims that the circuit that was copied was actually meant to run off higher voltage, around 24 volts DC. This is a possibility and it may give the pedal a more tame personality. But, for what it's worth, I like the Tycobrahe Octavia just the way it is...loud and aggressive! This circuit has a truckload of distortion right off the bat, and also has some crazy swells that add a lot of animation to the sound. The schematic below is the only example that I know of that has the correct original transistor part numbers, and also note that the capacitor on the third lug of the "Boost" control is actually 100�F. The parts highlighted in blue were not on the original circuit and are optional. They're there to serve as power supply filtering and reverse polarity protection. Even though they're optional, I would recommend that you use them!
Negative Ground Conversion
After I built the Octavia for the first time, I realized that I needed it to be powered by an external power supply because the battery drain of all the pedals was lightening my wallet considerably ;) So, after some modifications to the circuit, I came up with the first known negative ground conversion of the Tycobrahe Octavia. All I had to do was reverse all the polarized capacitors, replace the MPSA18 (Q1) with a 2N5087, and replace the two 2N6519 (Q2 and Q3) with a pair of 2N4401. You do not need to reverse the two Germanmium diodes on the output...they work fine just the way they are. Below is a schematic of my modified negative ground Octavia, and as before, the power supply filtering and reverse polarity protection parts are optional but highly recommended.
Some of the commercial clones of the Tycobrahe Octavia have an octave on/off switch, which allows the circuit to operate as an octave/fuzz, as it was originally designed, or as a purely fuzz circuit with no octave. This mod is very simple...all you need to do is add a SPST on/off switch to the circuit so that it disconnects one of the diodes following the transformer. When the diode is removed from the circuit, the octave effect is removed leaving you with a LOT of fuzz! Below is a circuit snippet showing how this mod is performed:
Pre-Gain Mod: if anyone is interested it looks like to added the pre-gain control from the ggg octavia you just need to put a 50k linear pot between the input and the 100n input cap. On the pot - 2 goes to the input on the board, 3 goes to input on the bypass switch and 1 goes to ground
